Jefftron II MOSFET with Wiring

The Jefftron II MOSFET is professionally made for electric airsoft replicas (AEG). It increases the rate of fire and extends battery life compared to standard wiring, and pre-soldered wires allow faster installation. Installation should be done by a person experienced in soldering and disassembling replicas.

Features

• Pre-soldered wires: 4 power wires 1.5 mm² (AWG16) with MPPE insulation and 2 signal wires 0.34 mm² (AWG22)
• Conformal-coated board, protected against water
• For springs up to M210
• 6-wire connection
• No current draw at idle
• No sparks at the trigger contacts
• Requires a working cut-off, selector plate, anti-reversal, trigger and trigger lock

Specifications

• Current: 150 A single shot or 50 A burst, max. 30 s
• Batteries up to 17 V (Ni-xx 8.4–12 V, Li-Po 7.4–14.8 V)
• Dimensions: 25 × 12 × 7 mm

Package Contents

• MOSFET with wiring
• Deans T male connector
• 30 A mini fuse
• 4 Faston female terminals 2.8 mm
• 6 black heat-shrink tubes 3.2 mm, length 20 mm
• 3 black heat-shrink tubes 4.8 mm, length 20 mm
• Installation manual in English